Morgan Rushworth Section Rollers PSR 50/155
Machine Zone
Section Rollers
Morgan Rushworth PSR 50/155
This model comes with a full set of rolls for the bending flat bar, flat bar on edge, round bar, square bar and box section.
The bottom rolls are both powered which provides positive traction, whilst the top ‘idler’ roll is adjustable to determine the bending radius of the workpiece according to its height setting.
The Section Rollers are accessible to all members who have passed an assessment for them and are one of the shared access metalwork machines.
| Price List |
|---|
|
This machine is available at no cost as part of a metal workspace booking. You will need to complete a safety assessment on this machine. |
| Technical Spec |
|---|
| Flat Bar on Edge at 800mm Ø mm 60 x 10 |
| Flat Bar as Flat at 750mm Ø mm 120 x 15 |
| Square Bar at 800mm Ø mm 35 |
| Round Bar at 900mm Ø * mm 35 |
| Round Tube at 1200mm Ø * mm 70 x 2 |
| Round Pipe at 900mm Ø * mm 33.7 x 2.65 |
| Rectangular Hollow Section at 850mm Ø *mm 50 x 40 x 3 |
| Square Hollow Section at 830mm Ø mm 60 x 60 x 3 (With optional special rolls) |
| Angle Iron Toe Out at 850mm Ø mm 50 x 50 x 5 |
| Angle Iron Toe In at 1200mm Ø mm 50 x 50 x 5 |
| Tee Section Toe Out at 650mm Ø mm 50 x 50 x 5 |
| Tee Section Toe In at 900mm Ø mm 50 x 50 x 5 |
| Tee Section Toe Up/Down at 900mm Ø mm 50 x 50 x 5 |
| Channel Legs Out at 1200mm Ø * mm 60 x 30 x 6 |
| Channel Legs In at 1200mm Ø * mm 60 x 30 x 6 |
| Power kW 1.5 |
| Rolls Diameter mm 155 |
| Shaft Diameter mm 50 |
| Bending Speed m/min4.3 |
